Guides
Here is a number most couples never see. Mae’s Ridge in Dripping Springs publishes that it includes one hour of post-event breakdown time in its standard pricing, and that additional setup or late-night cleanup hours are available at $300 per hour.
Which means load-out is not an abstraction happening after you leave. It is a window with a price on it, and if the band is still coiling cable at half past midnight, somebody is paying for that. The published wedding timeline agrees it is real: it schedules 11:15 p.m. to 12:15 a.m. for clean-up and vendor load-out, a full hour after an eleven o’clock send-off. Nobody writes about what happens inside it.
How long a band takes to load in is set by the distance and the obstacles between the parking spot and the stage, not by how much gear the band owns.
There is no single honest number, and any band that gives you one without asking about your venue is guessing. What can be said is that the three windows are different sizes and only one of them is about the gear: carrying it in, setting it up, and making it sound right in that room.
The figure worth having is one you can take yourself in about four minutes, under “The thing you can actually do about it”.
Four terms first, because they get used interchangeably and they are not the same thing. Load-in is carrying gear from the vehicle to the stage. Setup is assembling and cabling it. Soundcheck is making it sound right in that specific room. Load-out, sometimes called the strike, is all of that in reverse and it is always faster than people expect and slower than the schedule allows.
What moves the number:
Van parks forty feet from a ground-floor door. Flat, no step, wide enough for a rolling case. The room is empty and the floor plan is already set. Power is where somebody said it would be.
Park two hundred feet away across gravel, through a gate that does not latch open, up two steps, into a room being flipped by a catering team. Three times the time, and none of it is about the band.
Walk the path once, empty, and time it. From where a vehicle can legitimately park, through every door, to where the band will stand.
Nobody in the wedding industry suggests this, and it takes four minutes. It is also exactly what a working band does on a site visit, because that walk answers more questions than any conversation will. If it takes you ninety seconds carrying nothing, it takes a crew considerably longer carrying cases, several times over.
A band that arrives late does not get a shortened setup. It gets a soundcheck in front of arriving guests, which is the outcome everyone was trying to avoid in the first place. Soundcheck is loud, repetitive and unglamorous by nature, and it cannot be done quietly.
So the constraint that matters is not when the band may arrive, it is when the room is genuinely empty and available. Those are frequently different times and only one of them is in the contract.
Five questions, and the answers to the first and the last are the two most people never ask. The rest of the production conversation is in how much space and power a band needs and house sound or a band PA.
Early enough to finish soundcheck before the first guest arrives, which is the constraint that actually matters. The duration depends far more on the distance and obstacles between parking and the stage than on the size of the band or the amount of gear.
The standard published wedding timeline budgets a full hour of vendor load-out after the send-off, and at least one Austin-area venue includes one hour in its pricing and charges $300 per hour beyond it. Ask which arrangement your venue has.
It can, but it means soundchecking in front of an audience, which is loud and repetitive by nature. Ask the venue when the space is genuinely empty rather than when the band is permitted to arrive. Those are often different times.
Ask about the setlist, the show, or what we need from your venue. If you want a date looked at, I can send it straight to the band.